1、热质传递过程强化机制及预测

（1）含不凝结气体的相变换热机制及关联式表征

（2）气液两相流动传热机制及数值预测

2、高效热功转热技术及调控机制

（1）交变流复杂流动及相位调控

（2）热声系统优化及能效提升

3、系统热流输配及能质管理

（1）新一代换热技术在家电行业的应用

（2）低温推进剂长期存贮及温压调控

（3）受限空间及功率器件的热管理

教育经历：

2008/09-2012/06: 华北水利水电大学，电力学院，工学学士

2012/09-2018/12: 5822yh银河国际，动力工程及工程热物理，工学博士（硕博连读）

2016/01-2018/01: 美国伊利诺伊大学香槟分校，联合培养博士 工作经历：

2019/01-2022/02：5822yh银河国际，能动学院，助理教授/博士后

2022/03-至今: 5822yh银河国际，能动学院，副教授

代表性论文：

1.Yang P, Wang L, Qing T, et al. Multi-objective optimization of geometrical parameters of laterally perforated on silt fin by gray relation analysis based on Taguchi method[J]. International Journal of Thermal Sciences, 2024, 196: 108705.

2.Yang P, Qing T, Lei X, et al. Experimental study on thermal–hydraulic performance of moist air inside flat tube of two kinds of plate-fin heat exchangers[J]. Applied Thermal Engineering, 2023: 122121.

3.Yang P,Yang X, Liu Y. Experimental study on performance improvement of a household refrigerator with a flying-wing evaporator[J]. International Journal of Refrigeration, 2023, 155: 23-31.

4.Yang P, Yang X L, Liu Y. Experimental study on a new finned tube defrosting heater for household frost-free refrigerators[J]. International Journal of Refrigeration, 2023, 156: 92-101.

5.Yang P,Wang X, Liu Y, et al. Numerical Simulation of Vapor Configuration and Bubbles Coalescence in Cryogenic Propellant Tank Under Microgravity[J]. Microgravity Science and Technology, 2023, 35(2): 20.

6.Yang P,Yang X, Liu Q, et al. Performance improvement of a household freezer with a microchannel flat-tube evaporator[J]. Case Studies in Thermal Engineering, 2023, 49: 103394.

7.Yang P, Wang X, Zhi C, et al. Numerical investigation on effects of fuel rod with different bow deformation ratio X on two-phase boiling and flow performances of coolant in fuel assembly[J]. Progress in Nuclear Energy, 2023, 161: 104754.

8.Yang P,Zhang T, Hu L, et al. Numerical investigation of the effect of mixing vanes on subcooled boiling in a 3× 3 rod bundle channel with spacer grid[J]. Energy, 2021, 236: 121454.

9.Yang P, Zhang H, Zheng Y, et al. Investigation and optimization of heat transfer performance of a spirally corrugated tube using the Taguchi method[J]. International Communications in Heat and Mass Transfer, 2021, 127: 105577.

10.Yang P, Liu Q, Liu H, et al. Dynamic characteristics of a domestic freezer with a microchannel flat-tube condenser[J]. Science and Technology for the Built Environment, 2022, 28(3): 368-378.

11.Yang P, Xin P, Lei X, et al. Investigation and optimization of an intelligent power module heat sink using response surface methodology[J]. Case Studies in Thermal Engineering, 2021, 28: 101410.

12.Yang P, Zhang T, Zhang Y, et al. Model of R134a liquid–vapor two-phase heat transfer coefficient for pulsating flow boiling in an evaporator using response surface methodology[J]. Energies, 2020, 13(14): 3540.

13.Yang P, Zhang, YH, Wang S, Liu, YW. Experimental study on liquid-vapor two-phase pressure drop of pulsating flow in an evaporator. International Journal of Heat and Mass Transfer, 2020, 158, 119998.

14.Yang P, Zhang T, Zhang YH, Wang S, Liu YW. 2020. Model of R134a Liquid–Vapor Two-Phase Heat Transfer Coefficient for Pulsating Flow Boiling in an Evaporator Using Response Surface Methodology. Energies, 2020, 13(14): 1-19.

15.Yang P,Zhang YH, Wang XF, Liu YW. Heat transfer measurement and flow regime visualiztion of two-phase pulsating flow in an evaporator. International Journal of Heat and Mass Transfer, 2018, 127: 1014-1024.

16.Yang P, Chen H, Liu YW. Application of response surface methodology and desirability approach to investigate and optimize the jet pump in a thermoacoustic Stirling heat engine. Applied Thermal Engineering, 2017, 127: 1005-1014.

17.Yang P, Liu YW, Zhong GY. Prediction and parametric analysis of acoustic streaming in a thermoacoustic Stirling heat engine with a jet pump using response surface methodology. Applied Thermal Engineering, 2016, 103: 1004-1013.

18.Yang P, Chen H, Liu YW. Numerical investigation on nonlinear effect and vortex formation of oscillatory flow throughout a short tube in a thermoacoustic Stirling engine. Journal of Applied Physics, 2017, 121(21): 214902.

19.Yang P, Liu YW. Computation of the influence of a phase adjuster on thermo-acoustic Stirling heat engine[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2014: 0957650914553616.

20.Zheng Y, Yang P*, Liu Y, et al. Parametric optimization and analysis of thermodynamic venting system in liquid hydrogen tank under microgravity[J]. International Journal of Hydrogen Energy, 2021, 46(80): 40041-40053.

21.Chen P,Yang P, Liu L, et al. Parametric investigation of the phase characteristics of a beta-type free piston Stirling engine based on a thermodynamic-dynamic coupled model[J]. Energy, 2021, 219: 119658.

22.Liu YW, Yang P, Influence of inner diameter and position of phase adjuster on the performance of the thermo-acoustic Stirling engine. Applied Thermal Engineering, 2014, 73(1): 1139-1148.

23.Ye WL, Yang P,, Liu YW. Multi-objective thermodynamic optimization of a free piston Stirling engine using response surface methodology. Energy Conversion and Management, 2018, 176: 147-163.

24.Zhong GY,Yang P, Liu YW. Heat transfer and pressure drop correlations by means of response surface methodology. International Journal of Heat and Mass Transfer, 2018, 119: 312-332.

25.Liu L,Yang P, Liu YW. Comprehensive performance improvement of standing wave thermoacoustic engine with converging stack-Thermodynamic analysis and optimization. Applied Thermal Engineering, 2019, 160: 114096.

人才称号：

2022年入选 “绿谷精英·创新引领行动计划”人才